James H

Verified Customer
May 30, 2019

HM122

The assembly was a breeze, took only a couple of hours. Everything arrived in great shape with no damage. Have put only about 20 hours on the sawmill and it runs like a champ. Had to adjust the throttle cable a few times to get the rpms high enough to cut. Once we accomplished that the fun began. Have used it to cut cedars into custom poles and trellis systems. The only reason I gave it 4 stars was that the 7 hp Kohler motor really struggles with hardwoods over 16” in diameter. If I were to cut a lot of hardwoods I would do the upgrade to the 14 hp.

Scott M

Verified Customer
May 26, 2019

HM122

Great machine built with quality materials. Been milling Black Walnut, Cherry, White Oak, Hack berry and Hemlock so far. Cuts great with sharp blade. All boards and slabs cut on mill will be used for the interior woodwork in the small cabin I'm Starting on soon. I wish I could have afforded the HM 130 for bigger log capacity. Thanks Woodland Mills!

Tom A

Verified Customer
May 17, 2019

HM122

No regrets purchasing the mill, I have already cranked out a bunch of projects this spring and I’m currently building a three sided log cabin on my property very easy to use and assemble and I recommend anybody interested. Tom in AK

Erica B

Verified Customer
May 17, 2019

HM122

My husband absolutely loves this sawmill, it was affordable and gets the job done. We have enough lumber now to build a goat barn. We love this mill and look forward to many more years of sawing. Thanks woodland Mills for an awesome product and great customer service

Calvin V

Verified Customer
May 17, 2019

HM122

I purchased the saw with a small job in mind but that changed before the saw made it to me. I have had 8 large pine trees given to me, 7 cypress logs 24’ long, and one red oak. Still learning to recognize when blades need to be replaced and how to adjust the tracking. Enjoying seeing the lumber that these logs are giving me. Really like the quality of this machine.

Mark H

Verified Customer
May 16, 2019

HM122

It's been a great mill so far! Couple little hiccups (definitely a learning process to fine tune everything) have milled all sorts of wood already and am eager to continue milling for years to come. Highly recommended HM122. It has been an outstanding mill for me. Thanks for the awesome product Best regards, Mark

Ivan N

Verified Customer
May 16, 2019

HM122

The mill was easy to set up and work amazing it is more than I expected love it

Gerard S

Verified Customer
May 15, 2019

HM122

I love it. Works great. Need more blades though. Can’t seem to stop cutting into the metal tube stops. Keep forgetting to lower them.

James P

Verified Customer
May 14, 2019

HM122

Derek helped me diagnose a blade alignment issue, after replacing the back beam, the mill works beautiful! Wish I would have bought one years ago! Jamie Painter Ketchikan, Alaska

Daniel F

Verified Customer
Apr 29, 2019

HM122

I am very impressed with the HM122. The entire experience with Woodland Mills has been great beginning with the polite and responsive sales team and concluding with cutting up my first couple of logs. My wife and I picked up the mill at the Buffalo warehouse. The folks there were very friendly and helpful in getting the pallet loaded on our trailer. We were extremely impressed with how well everything was packed. The assembly of the mill only took about a day and a half. The instructions were clear and easy to follow using the very nice product manual. (I can’t remember when I last got a manual that was printed on high quality, glossy stock paper, very nice!) Setup lessons learned: * I downloaded the drawings from the website and built a 4x4 base out of pressure treated lumber prior to picking up the mill. Stabilized the base by creating 2x4 “I” beams to lock it all together. This keeps the mill 6 1/2 inches off the ground and enables me easily move the mill with my tractor or to load the mill on my trailer and take it to other locations. * The HM122 doesn’t come with levelers so I used 1/2” carriage bolts to create my own. Let the crown of the bolt fit into the holes in the rail and drilled a hole to receive the extra length of the bolt into my base frame. Also, put 2 1/2” lags on each side to secure the rail assembly to the base. * To verify everything was set up correctly I cut an 8 foot long, 1/16 inch thick slice of the first “cant.” Everyone that has stopped by to see the mill has been impressed with the quality and robustness of the HM122. For a low-end mill, the materials really exceeded my expectations. It is a great product for the price and has proven it will work perfectly for milling hardwoods to support my woodworking hobby as well as creating some construction grade lumber for projects around the property. Great experience, very happy customer!

Showing 51-60 reviews of 240.

ABONNEZ-VOUS À NOTRE BULLETIN D’INFORMATION!